Back To Blog

How To Get Dried Blood Out Of Carpet Baking Soda? Cleaning Hacks


how to get dried blood out of carpet baking soda

Having trouble getting dried blood stains out of your carpet? It’s time to know how to get dried blood out of carpet baking soda!

Yup, today we’re giving you a step-by-step guide on how to get dried blood out of carpet baking soda effectively with an ingredient that’s almost always in every kitchen.

Learn how to make a paste, apply it to the stain, and vacuum it up. We also share tips for preventing and removing dried blood stains on your carpet. Say goodbye to unsightly stains with the power of baking soda!

How To Get Dried Blood Out Of Carpet Baking Soda?

Here is a step-by-step guide on how to get dried blood out of carpet baking soda that you can follow and ensure that you can restore the look of your carpet and keep the home environment clean.

a. Blot the Stain

Start by gently blotting the dried blood stain with a cloth soaked in cold water to loosen the stain.

This initial step is crucial, as rubbing the stain can push it deeper into the fabric. Once you have blotted the stain, mix a solution of mild detergent and cold water to continue treating the affected area. Experts recommend letting the solution sit on the stain for a few minutes before rinsing it thoroughly with cold water. For stubborn stains, you can also try using a mixture of ammonia and water to further break down the blood particles. Remember to always check the fabric care label before attempting any cleaning method to ensure you do not damage the material.

b. Create a Baking Soda Paste

Create a thick paste by mixing bicarbonate of soda with a small amount of water until it reaches a spreadable consistency.

To achieve the ideal proportions, start with about two parts bicarbonate of soda to one part water. Adjust as necessary until you achieve a smooth paste that is easy to apply and spread onto the desired surface. Many cleaning professionals recommend this ratio as it provides the right balance of abrasiveness and viscosity for effective cleaning. Remember to test a small area first to ensure the mixture does not damage or discolour the surface. You can add a few drops of essential oil for a pleasant fragrance and extra cleaning power.

c. Apply the Paste to the Stain

Carefully apply the bicarbonate of soda paste directly onto the dried blood stain, making sure to cover it completely.

Use a spoon or spatula to spread the paste evenly over the affected area, ensuring all parts of the stain are coated.

For optimal results, let the paste sit on the stain for at least 30 minutes to allow it to absorb and lift the blood particles.

Cleaning experts recommend using a ratio of 1:2 bicarbonate of soda to water for this paste, creating a thick consistency that adheres well to the fabric.

d. Let it Sit

Allow the bicarbonate of soda paste to sit on the dried blood stain for at least 30 minutes to let it absorb the stain.

Allowing the paste to sit is crucial as it gives the bicarbonate of soda enough time to work its magic by breaking down the proteins in the blood, making it easier to remove. Home cleaning professionals recommend leaving the paste undisturbed for around 30-60 minutes to achieve optimal results. During this time, the paste will gently lift the stain without damaging the underlying surface. In some cases, depending on the severity of the stain, allowing it to sit for a longer period may yield better outcomes. Covering the area with a damp cloth can help prevent the paste from drying out too quickly.

e. Vacuum the Paste

Once the bicarbonate of soda paste has dried, vacuum the area thoroughly to remove all residue from the carpet.

When vacuuming the area, it is important to use the right technique to ensure all bicarbonate of soda residues are effectively removed without causing any damage to the delicate carpet fibres. Begin by slowly and steadily running the vacuum over the affected area in multiple directions. This will help lift up any remaining residue that may have settled deep into the carpet fibres. Be sure to pay extra attention to corners and edges where residue tends to accumulate.

Tips for Preventing and Removing Dried Blood Stains on Carpet

While knowing how to get dried blood out of carpet baking soda, it’s also good to know how preventive measures can be taken to keep carpets clean and stain-free:

a. Act Fast

One of the most important tips for dealing with dried blood stains on carpet is to act quickly as soon as the stain occurs.

Acting swiftly is crucial because fresh blood stains are much easier to remove than dried ones. When the blood dries on the carpet fibres, it can penetrate deeper and create a stubborn bond, making it harder to eliminate. Rapid action helps prevent the stain from setting and becoming more permanent, ultimately leading to a better chance of complete removal.

After a blood stain occurs, immediately blot the area with a clean cloth or kitchen roll to absorb as much blood as possible. Avoid rubbing, as this can spread the stain further. Rinse the affected area with cold water to dilute the blood and continue blotting until minimal transfer occurs on the cloth.

b. Use Cold Water

Using cold water is essential when treating dried blood stains on the carpet, as hot water can cause the blood proteins to set into the fibres.

When dealing with blood stains, opting for cold water helps prevent the stain from becoming more stubborn. Cold water is gentle on the fibres and helps break down the proteins in the blood without setting them in. Additionally, cold water is particularly effective in combination with a mild detergent specifically designed for carpet stains. It’s recommended to blot the stain with a clean cloth soaked in cold water, working from the outside in to avoid spreading the stain further.

c. Avoid Heat

Avoid using heat to treat dried blood stains on the carpet, as it can cause the stain to set permanently.

Heat can actually cause the proteins in blood to bind to the carpet fibres, making the stain harder to remove. Instead, opt for cold water and mild detergent to soak and blot the stain gently.

Cleaning experts recommend using a mixture of water and ammonia or hydrogen peroxide for tougher blood stains, always ensuring to test on a hidden area of the carpet first.

e. Test on a Small Area First

Before applying any cleaning solution to a dried blood stain on your carpet, always test it on a small, inconspicuous area first.

This simple step can prevent any potential damage to your carpet’s materials or colours that may be caused by harsh chemicals. Different cleaning solutions react differently with various carpet types, so it’s essential to ensure compatibility. Experts recommend using a mild detergent or a specialised carpet cleaner specifically formulated for blood stains. These products are designed to effectively lift the stain without harming the carpet fibres.

These are step-by-step guides on how to get dried blood out of carpet baking soda to some preventive measures you can take. However, dealing with stubborn stains like dried blood can be daunting and time-consuming. For a thorough and professional clean, it’s crucial to trust the experts.

At TEKA Cleaning, we specialise in carpet cleaning services that effectively remove even the toughest stains, including dried blood. Our team uses advanced techniques and equipment to ensure your carpets are not only clean but also well-maintained and long-lasting.

Don’t let stains ruin the look and hygiene of your carpets. Contact TEKA Cleaning today at 01233 751 544 to book our professional carpet cleaning services. Let us handle the tough stains while you enjoy a spotless and fresh carpet.

Read also:

,

Back To Blog


Leave a Reply

Your email address will not be published. Required fields are marked *